Safety; Intended Pupose; Safety Instructions - Moehlenhoff Alpha IP Manual De Instrucciones

Alpha IP WTH 61001
17

Safety

2 Safety
2.1

Intended pupose

The room control unit Display S (WTH 61001) is a component of the Al-
pha IP System and serves
• for installation in environments of residential use,
• for the registration of the actual temperature (room temperature)
and the humidity,
• for the setting of the target temperature (comfort temperature),
• for the regulation of the actual temperature by controlling radiator
thermostats and electric heaters with pluggable switch,
• for the wireless communication in the Alpha IP network.
Every other use, modification and conversion is expressively forbidden.
Improper use leads to dangers the manufacturer cannot be held liable
for and will exempt guarantees and liabilities.
2.2

Safety instructions

All safety notes in these instructions must be observed in order to avoid
accidents with personal damage or property damage. No liability is as-
sumed for personal damage and property damage caused by improper
use or non-observance of the danger notes. In such cases any warranty
claim is invalid! There is no liability for consequential damages!
• The device may only be opened by an authorised specialist.
• Only use the device if it is in flawless state.
• Observe the performance limits of the device and its environmental
conditions.
• Only operate the device in a dry and dust-free environment.
• Do not expose the device to the influence of humidity, vibration,
continuous solar radiation or other types of radiation, coldness or
mechanical load.
• Ensure that children do not play with this device or its packaging.
Children must be monitored if necessary.
DEU ENG FRA
FIN SWE POL
NDL ITA ESP
RUS
DAN/NOR