TESY MC 2015 Instrucciones De Uso Y Almacenamiento página 5

ADJUSTMENT OF THE HEATING CONTROLLER
When the room temperature gets to its desired
condition you should turn the right-hand switch of the
heating controller in counter-clockwise direction to
position in which the appliance turns off but not more
than that. The adjusted that way temperature will be
automatically regulated and kept at a permanent level
by the heating controller.
FROST AND COLD PROTECTION
When ambient temperature falls under +5°C the
appliance automatically turns on. That happens when
thermostat switch is in its initial position and the control
switch is at one of the two operating modes!
MOVING THE APPLIANCE:
If it is necessary to move the appliance to another
place of operation, switch it off by pulling the power
plug out of the socket, holding the appliance handles
with both hands, move it to its new position, having
in mind that the appliance must get cold (cooled
down) before doing this. Moving hot appliances may
lead to bad consequences for the user like burns or
inflammable materials entering the panel heater during
its movement.
IN-BUILT OVERTURN (FALL) PROTECTION SWITCH
The panel heater has got an in-built overturn protection
switch. In case the panel heater overturns, the power
supply will be stopped. Let the panel heater cool
down and then put it into upright position again. The
appliance will restore its normal operation.
AUTOMATIC SAFETY STOP
There is an in-built device in the panel heater (self-
restoring thermal switch), which actuates automatically
and switches off the panel heater in case of overheating.
The thermal switch will restore its normal state when
the appliance temperature decreases to its normal level.
Important!
It is possible during initial operation of the
appliance a specific odour to be emitted. This is
normal at the initial period of operation. Ensure
that the panel heater is used in a well-ventilated
room and let it work until the odour disappears.
You may hear a specific sound resembling
popping until the panel heater warms up. This is
normal and the panel heater operates in normal
mode. As soon as the panel heater warms up this
sound will disappear.
English
CLEANING
•
It is compulsory first to switch off the appliance and
disconnect its power cord from the socket. Before
starting cleaning the panel heater you should wait
until it cools down after disconnecting it from the
power socket.
•
Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
•
Never immerse the appliance into water – there is
danger to your life from electric shock!
•
Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the
surface coating of the appliance.
STORAGE
•
Before putting away the panel heater let it cool
down after disconnecting it from the power socket.
•
Use the original packing for storing the panel heater
if it will not be used for a certain period of time. The
product can be protected from excessive dust and
dirt when it is kept in its original packing.
•
Never put a hot appliance into its packing!
•
The product has to be stored at a dry place away
from direct sunlight.
•
It is explicitly forbidden to store the appliance in
wet or damp premises.
PRODUCT PACKING SET INCLUDES:
Panel heater
Castors/feet
Manual
Guarantee certificate
TECHNICAL CHARACTERISTICS OF THE
APPLIANCE:
Model Rated power
MC2015 2000W
Warning: in order to avoid overheating,
do not cover the appliance!
Environment protection instructions
Old electric appliances contain valuable materials
and therefore should not be disposed of as domestic
waste! We ask you for your active cooperation to
protect the resources and the environment by
submitting your appliance to organized buy-back
stations (if there are such).
1 pc.
2 pcs.
1 pc.
1 pc.
Rated voltage Rated fre-
quency
230V~ 50Hz
Usage and Storage Instructions
EN
5