Turning The Projector On And Off - Epson BrightLink 455Wi+ Guía De Referencia Rápida

2. Connect the flat end of the cable to
any available
your notebook or desktop
computer.

Turning the Projector On and Off

Before you turn on the projector, turn on your computer.
1. Make sure the projector is plugged in. The Ppower light should be orange.
Power light
2. Press the Ppower button on the remote control.
After a few moments, you should see your computer desktop displayed. If you
see a blank screen or the
Warning: Never look into the lens when the lamp is on. This can damage your
eyes, and is especially dangerous for children.
USB port on
Power
button
No signal
message, see page 36 for help.
Turning the Projector On and Off
11