Pcb Layout - CARLO GAVAZZI SHOWEAGPS Datos Técnicos E Instrucciones De Instalación

EN

2.2.4. PCB Layout

1
1) Connection to the rain sensor in the housing cover
2) Connecting plug, suitable for massive conductors of up to 0.8 mm²
1: +24 V DC | 2: GND | A: data | B: data
3) DIP switch for interface parameters (see detailed view)
4) DIP switch for slave address (see detailed view)
5) LED "Com", "Error" and "Power"
„Power": operating voltage
„Error": sensor error or erroneous data
„Com": bus communication
6 GPS module
SHOWEAGPS Weather Station • Version: 28.10.2013 • Technical changes reserved. Errors reserved.
2 3 4
10 Installation and commissioning
5
6
Fig. 8: Overview PCB