Miscellaneous; Charge - ATEQ Orange Electronic OE46 Guia Del Usuario

1. CHARGE

Low Battery Indication
Your TPMS TOOL incorporates a low
battery detection circuit. Battery life
averages 300 sensor tests per charge
(approximately 60 to 80 vehicles),
although this may vary depending on
the sensor model.
DO NOT use the tool with low battery status because the transmission and emission may
not be reliable.
When charging, the battery light is red and
becomes green when the battery is fully
charged.
USB power
supply connector
When the battery is low, the "status bar" appears every 10 seconds. This display will stop
when the battery loses power.
Plug the USB cable between the tool and the charger adapter, then plug the charger
adapter into an appropriate outlet. The red LED "CHARGE" light will turn on.
Battery replacement
If the battery is defective, the tool must be returned to the factory for battery replacement.
Opening the tool or tampering with the seal placed on the tool, if broken, will void
the warranty.
UM-365OEA-U

MISCELLANEOUS

Battery indicator status:
0%
When 0% is flashing, the tool will turn off after
10 seconds.
The battery is charging.
please contact after sales service.
Fig. 5
OE46 TPMS TOOL User Guide
25% 50%
There is an issue with the battery -
User manual OE46 Page 27/34
75% 100%