Eton SOLARLINK FR370 El Manual Del Propietario página 6

DYNAMO POWER
(RECHARGEABLE Ni-MH BATTERIES)
The rechargeable Ni-MH (nickel-metal-hydride) battery is in the battery
compartment. To use it plug the battery into the socket adjacent to it, then
set the power switch to the DYNAMO position. You may have to charge the
battery; to do this turn the crank for 90 seconds. The rechargeable battery
will eventually lose its ability to hold a charge. Call Eton Corporation to order
another one.
DC-IN 5V AC ADAPTER (not included)
Plug in the AC adapter (5 Volt, positive polarity, 300 milliampere, not
included) to the DC IN 5 volt socket. To charge the Ni-MH battery, set the
<Power Supply> knob to "DYNAMO." In the United States, an AC adapter
can be purchased by calling 1-800-872-2228, 8 am - 4:30 pm, Pacific Time.
USB CABLE POWER
To charge the Ni-MH battery via the USB port (DC-IN), set the <Power
Supply> knob to the "DYNAMO" position. Plug the USB cable port into the
computer, plug the other port into the mini USB jack. The electricity will be
powered into the Ni-MH batteries.
6
Ni-MH Batteries
SOLARLINKFR370 OWNER'S MANUAL
Ni-MH Batteries Socket
AAA Batteries
Compartment