hEAdSET CONTrOLS
action
Turn on the
headset
Turn off the
headset
Answer a call
Reject a call
End a call
Make a call
Adjust volume
Transfer a call
from the headset
to the phone
Transfer a call
from the phone
to the headset
Plantronics Voyager 520
Steps
Press and hold the call control button until the indicator
glows blue. The indicator then flashes red up to three
times to show you the battery charge level.
See "Check the charge level" on page 5 for details.
Press and hold the call control button until the indicator
glows red. When the power is off, the indicator stays off.
Briefly press the call control button.
Press the call control button for 2 seconds to reject the call.
Briefly press the call control button.
The call automatically transfers to your headset after you
enter the number on your phone and press send.
Push the call control button up to increase the listening
volume or down to decrease the volume.
See volume warning on page 17.
Press and hold the call control button until you hear a
long low tone.
Briefly press the call control button.
9