Power Linking - Chauvet DJ Shocker Panel 180 Guía De Referencia Rápida

Shocker™ Panel 180 USB QRG
To Begin
Description
Overview
AC Power

Power Linking

Carefully unpack the Shocker Panel 180 USB and check that all the parts are in
the package, and are in good condition.
If the box, or any of the contents, appear damaged from shipping, or show signs
of mishandling, save all packaging and file a claim with the carrier immediately,
do not notify Chauvet. Failure to report damage to the carrier immediately, or
failure to have all packaging available for inspection, could invalidate your claim.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with Chauvet within 7 days of
delivery. For information on contacting Chauvet, see
QRG.
The Shocker Panel 180 USB is a high-powered LED strobe light with 4 zones of
control for a variety of attractive effects that create stunning visuals. It has a
rugged die-cast housing, and operates in IR mode, wired or wireless DMX,
Master-Slave, or Standalone modes. DMX control wirelessly with the convenient
built in D-Fi™ USB port.
Microphone
Safety Loop
DMX In
Fuse Holder
Power In
WARNING! DO NOT plug anything other than a D-Fi™ USB into the USB
port. Doing so may cause damage to the product.
Shocker Panel 180 USB has an auto-ranging power supply that works with a
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Power linking is when products are daisy chained together through their Power In
and Power Out ports, so that many products can be powered from one outlet.
For the maximum number of Shocker Panel 180 USBs that can be
power linked at 120 V or at 240 V, see the User Manual or the label on the
product. The User
http://www.chauvetlighting.com.
Display
Control Buttons
Manual is available
3
Contact Us at the end of this
D-Fi™
USB Port
DMX Out
Power Out
at the Chauvet website:
EN