Troubleshooting - Bella NUTRIPRO Manual De Instrucciones

TRoUblEsHooTInG

PRoblEM
Cold Press Juicer
The
will not turn ON .
Cold Press Juicer
The
stopped during juicing .
The juice strainer is blocked .
Food is jammed around
the crushing auger
and inside the base
of the processing bowl .
SO-309848_BELLA NutriPro_IM_r5.indd 16
PossIblE solUTIon
Cold Press Juicer
• The
operating unless the lid is completely and properly assembled .
The crushing auger's top spindle must press against the lid;
the lid's tab must be fully inserted into the slot in the upper rim
of the processing bowl .
• Press the ON/OFF/REVERSE button to OFF (O) .
Turn the locking lid to ensure lid is locked in place . (See Figure 6 . )
• The stainless juice strainer and crushing auger may be clogged
with pulp . Clean the juice strainer and rinse the crushing auger .
• Reassemble
strainer is properly seated .
• Check to make sure the crushing auger is properly seated.
has • Press the ON/OFF/REVERSE button to REVERSE (==)
the direction of the crushing auger and then back to ON (—)
to resume operation .
• Clean the stainless steel juice strainer and rinse
the crushing auger .
• Chop dense fruits and vegetables into smaller pieces
to facilitate juicing .
's safety system prevents the unit from
Cold Press Juicer
. Check to make sure the juice
16
12-09-04 2:18 PM