Ipod Control - Panasonic CQ-RX400U Guía De Mejora Del Sistema

iPod Control

Connection of the optional direct cable for iPod ® (CA-DC300U) allows users to operate the iPod including fi le selection and fi le
sequence change with the buttons on this unit.
By connecting iPod series to USB connector via a USB extension cable for iPod (USB 2.0, not included), you can enjoy music fi les
stored on the iPod series in your car. \CQ-RX400U\
Connect the iPod.
1
Press [SRC] to select the iPod mode.
2
Playback starts.
Notes:
• If playback does not start, press [BAND]
().
• Select USB mode to operate iPod series
connected with USB connector. \CQ-RX400U\
File Selection
[]: Next fi le
[]: Beginning of the current fi le
For the preceding fi le, press twice.
1 Press [] (LIST) to activate the
Playing Mode Selection mode.
Turn [VOL] clockwise or
2
counterclockwise to adjust.
PLAYLIST: Playback by playlist (Default)
ARTIST: Playback by artist
ALBUM: Playback by album
GENRE: Playback by genre
Press [VOL] (PUSH SEL:
3
Select) to determine the
selection.
• Lights when the direct cable for iPod
is connected and iPod mode is selected.
• Lights when a USB extension cable for iPod and iPod
are connected with USB connector and USB mode is
selected. \CQ-RX400U\
File indicator (Current fi le/All fi les)
A number up to 999 is displayable.
10
CQ-RX400U/CQ-RX200U
Notes:
• Hold down for fast forward/reverse.
• When fast forward comes to the end of a fi le or
fast reverse comes to the beginning of a fi le,
regular playback starts even if the fast forward or
reverse button is pressed.
Pause
Press [BAND] ().
Press again to cancel.
4 Turn [VOL] clockwise or
counterclockwise to select a
portion to be played.
Press [VOL] (PUSH SEL:
5
Select) to determine the
selection.
Note: To select playing mode in
step 2, press [] (LIST).
Notes:
• To return to the regular mode, press [DISP].
• Files without an album name or an artist name are not
playable in the playing mode of the album or artist
display respectively.
® (CA-DC300U) Lights when a USB extension cable for
iPod and iPod are connected with USB
connector and USB mode is selected.
\CQ-RX400U\
• iPod number, 1 (iPod 1)/2 (iPod 2),
Play Mode indicators
Lights when each mode is activated.
Lights when the Expansion Module
(CY-EM100U) is connected.
Repeat play
• If an iPod is connected to the USB
Shuffl e play (songs)
connector, the iPod number is not
Blinks when each mode is activated.
displayed. \CQ-RX400U\
Shuffl e play (albums)
Controllable iPod/software version (System-up connector)
• 4th generation iPod/ver. 3.1.1
• 5th generation iPod/ver. 1.2.1 (Video playback is not
supported.)
• iPod photo/ver. 1.2.1
• iPod mini/ver. 1.4.1
• 1st generation iPod nano/ver. 1.3.1
• 2nd generation iPod nano/ver. 1.1.3
Notes:
• Make sure to detach the iPod after turning off the car engine
(turning the ACC to OFF). The iPod may not shut down while
still connected, which may result in battery depletion.
• Do not connect iPod accessories such as the remote
controller or headphones while the iPod is connected to this
unit. Doing so may cause the iPod to not operate correctly.
Current fi le/all fi les/iPod
number (Default)
Time/iPod number
Title name
Album name
Artist name
Clock time
Repeat Play
The current fi le is repeated.
Press [6] (REPEAT). lights.
Press again to cancel.
Note: The All Repeat Play function of iPod is always
activated and cannot be canceled from this unit.
Controllable iPod/software version (USB connector)
• 5th generation iPod/ver. 1.2.1 (Video playback is not
supported.)
• 1st generation iPod nano/ver. 1.3.1
• 2nd generation iPod nano/ver. 1.1.3
Operation check has been completed with software available at
the end of September, 2007. We do not guarantee the operation
with our future products or upgraded software.
For the models to be supported, visit the Web Site at http://
panasonic.net (refer to the description regarding Car Audio/AV).
• Connect this unit after turning down the volume of the iPod.
• "NO IPOD" appears until the iPod is recognized after
connecting the iPod, turning on the power of the main unit,
or performing source selection on the main unit side. This
indicates there is nothing wrong with the main unit.
• We do not guarantee all the operations of connectable devices.
Press [DISP].
(Data reading)
(Data reading)
(Data reading)
Notes:
• To have another circle scroll while a text is displayed,
press [3] (SCROLL). If the number of displayed
characters is 8 or less, the characters do not scroll.
• "NO TEXT" is displayed when there is no information.
Shuffl e
The shuffl e function of iPod corresponds to the
RANDOM function of this unit.
Songs
All the available fi les are played in a random sequence.
Press [4] (RANDOM). lights.
Press again to cancel.
Albums
All the playable albums are played in a random
sequence.
Hold down [4] (RANDOM) for 2 sec. or
more. blinks.
Hold down again to cancel.
CQ-RX400U/CQ-RX200U
11