Publicidad
en - Information
1. Parts:
A Thermostat
B Screws and plugs
C Back plate
D Documentation
E Batteries
2. Steps:
1. Choose the right location for the thermostat.
• A place is suitable if it is away from heat sources (fireplace, radiator, direct sunlight, light,
candles, etc.) and away from draughts.
2. Choose the right location for the gateway:
• The gateway is at least 50 cm from the climate appliance.
• The gateway is not at a place where the climate appliance is between the gateway and the
thermostat.
• The gateway is at least 100 cm from any other device with a strong electromagnetic
radiation, like washing machine, dryer or hi-fi speaker.
• You do not mount the gateway on a metal surface.
3. Remove the screw from the gateway.
4. Remove the cover from the gateway.
5. Remove the cable strain relief clamps.
6. Disconnect the climate appliance from the power supply.
7. Connect the external antenna.
8. Turn the antenna down to a vertical position.
9. Connect the necessary wires:
9.1. Connect the power adapter (part G or H).
16
F Gateway
G Power adapter
H Power adapter
I External antenna
7668357 - v.09 - 15062020
Publicidad
