Replacing The Batteries - Braun WelchAllyn PRO 4000 Manual De Instrucciones

Error message
2
1
Trouble-shooting
Situation
Battery is low, but thermometer
will still operate correctly.
Battery is too low to take
correct temperature
measurements.
Do you have any further
questions?

Replacing the batteries

The thermometer is supplied with two 1.5 V batteries type AA (LR 6).
For best performance, we recommend Duracell
Insert new batteries when the battery symbol appears on the display.
Open the battery compartment. Remove the batteries and replace with
new batteries, making sure the poles are in the right direction.
Slide battery door back until it snaps in place.
To protect the environment, dispose of empty batteries
according to national or local regulations.
Calibration
The thermometer is initially calibrated at the time of manufacture.
If this thermometer is used according to the use instructions, periodic
readjustment is not required. If at any time you question the accuracy of
temperature measurements, please contact Welch Allyn (see page 14).
Manufacturing date is given by the LOT number located in the battery
compartment. The first number after LOT represents the last digit of the
year of manufacture.
The next three digits give the day of the year of manufacture.
An example: LOT 0116 xx xx – this product has been manufactured on
the 116th day of the year 2000.
Solution
Insert new batteries.
Insert new batteries.
... contact Welch Allyn at
1-800-535-6663
(in Canada at 1-800-561-8797).
®
alkaline batteries.
11