Gws 10 Wind Sensor Installation Instructions; Product Registration - Garmin GWS 10 Instrucciones De Instalación

EN
To obtain the best possible performance, install your GWS 10 Wind Sensor according to the following instructions. If you experience difficulty
during the installation, contact Garmin
The GWS 10 communicates with NMEA 2000
devices, and for more information about NMEA 2000.
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
Cautions
• Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
• When drilling or cutting, always check the opposite side of the surface. Be aware of fuel tanks, electrical cables, and hydraulic hoses.
• Use caution when working from heights.
• Connect the gray in-line lightning arrestor to help prevent lightning-strike related damage to the NMEA 2000 network. The lightning
arrestor is designed to help prevent damage due to nearby lightning strikes, but it is not able to protect against direct lightning strikes.
Garmin is not responsible for lightning-strike related damage.

Product Registration

Help us better support you by completing our online registration at www.garmin.com/registration/.
For future reference, write the serial number assigned to your GWS 10 in the space provided. It is located on a sticker on the unit.
Serial number
Contact Garmin
Contact Garmin Product Support if you have any questions while using your GWS 10. In the USA, go to www.garmin.com/support, or contact
Garmin USA by phone at (913) 397-8200 or (800) 800-1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to www.garmin.com/support
phone at +44 (0) 870.8501241.
Packing List, Tools Needed, and Optional Accessories
Before installing your unit, confirm that your package includes the following items. If any parts are missing, contact your Garmin dealer
immediately.
GWS 10 Basic Package:
• GWS 10 Wind Sensor unit
• GWS 10 Wind Sensor mounting hardware
• 2 NMEA 2000 terminators (1 female, 1 in-line)
• NMEA 2000 backbone cable (30 m)
• NMEA 2000 field-installable connector
• NMEA 2000 in-line lightning arrestor
• GWS 10 documentation
Tools Needed (not included):
• Phillips screwdriver
• Drill and / in. (3.3 mm) drill bit
1
8

GWS 10 Wind Sensor Installation Instructions
™
Product Support, or seek the advice of a professional installer.
®
-compatible chartplotters and displays. Refer to
®
and click Contact Support
www.garmin.com
for in-country support information, or contact Garmin (Europe) Ltd. by
GWS 10 with GMI 10 Bundle Package:
™
• GWS 10 basic package
• GMI 10 unit with protective cover
• GMI 10 flush-mount hardware
• GMI 10 power/data wiring harness
• NMEA 2000 power cable
• NMEA 2000 drop cable (2 m)
• NMEA 2000 T-connector
• GMI 10 documentation
Additional Optional Items (not included):
• Additional NMEA 2000 network components
for a list of compatible
GWS 10 Installation Instructions