Control Panel - LG DLE3180 Serie Manual Del Propietário

Control Panel

1
NOTE
• Model numbers can be found on the cabinet inside the door.
Power Button
1
Press the button to turn the dryer ON. Press again to
turn the dryer OFF.
NOTE
• Pressing the Power button during a cycle will
cancel that cycle and any load settings will be lost.
Cycle Selector Knob
2
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. On Manual Dry
cycles, these settings can be adjusted using the cycle
setting buttons anytime before starting the cycle.
Start/Pause Button
3
Press this button to start the selected cycle. If the
dryer is running, use this button to pause the cycle
without losing the current settings.
NOTE
• If you do not press the Start/Pause button to
resume a cycle within 4 minutes, the dryer turns off
automatically and all cycle settings are lost.
Cycle Modifier Buttons
4
Use these buttons to select the desired cycle settings
for the selected cycle. The current settings are shown
in the display. Press the button for that option to view
and select other settings.
2 3
7 6
4
More Time/Less Time Buttons
5
Use these buttons with the Time Dry and other
Manual Dry cycles to adjust the drying time. Press
the More Time button to increase the selected
manual cycle time by 1 minute; press the Less Time
button to decrease the cycle time by 1 minute.
Time and Status Display
6
The display shows the settings, estimated time
remaining, options, and status messages for the
dryer.
Cycle Option Buttons
7
Press each of these buttons to select additional
cycle options. And press and hold any button marked
with an asterisk for 3 seconds to activate a special
function.
OPERATION 31
5