Safety information
9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to
the wash water. These substances give off vapors that could ignite or explode.
10. Under certain conditions, hydrogen gas may be produced in a hot water system that
has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for 2 weeks or more, before using a washer or combination
washer-dryer, turn on all hot water faucets and let the water flow from each for several
minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not
smoke or use an open flame during this time.
Critical installation warnings
WARNING
Plug the power cord into an AC 120 V / 60 Hz/wall socket rated at 15 amps or higher. Use
the socket for this appliance only. In addition, do not use an extension cord.
•
Sharing a wall socket with other appliances, using a power strip, or extending the power
cord may result in electric shock or fire.
•
Do not use an electric transformer. It may result in electric shock or fire.
•
Ensure that the power voltage, frequency, and current match the product's specifications.
Failing to do so may result in electric shock or fire.
Have this appliance installed by a qualified technician or service company.
•
Failing to do so may result in electric shock, fire, an explosion, problems with the product,
or injury.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
•
Unplug the power plug and clean it with a dry cloth.
•
Failing to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.
•
If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
6 English
WA7700M_DC68-03774D-04_EN.indd 6
SAVE THESE INSTRUCTIONS
2019-02-14
6:24:02