Quick Setup; Connection Diagram - ION Road Warrior Guia De Inicio Rapido

Quick Setup

Connection Diagram

Items not listed under the Box Contents are sold separately.
Features
1. Volume –: Decreases the speaker volume on Road Warrior.
2. Volume +: Increases the speaker volume on Road Warrior.
3. Tune +: Press and release this button to go to the next radio station.
4. Tune –: Press and release this button to select a previous radio station.
5. Mic +: Press and release this button to increase the level of a connected microphone.
6. Mic –: Press and release this button to decrease the level of a connected microphone.
7. Light: Press and release this button to cycle through the speaker light mode. The lights
can be set to illuminate solid, pulsate, or off.
8. Bluetooth Button: Press the Bluetooth button to disconnect a paired Bluetooth device.
9. Source: Press and release this button to change the listening source between FM and
Bluetooth.
10. Charging Indicator: The battery outline icon in the display will flash when the battery is very
low. With the battery charging indicator, when the power cable is connected, movement of the
top battery segment shows the battery is charging. When the power cable is disconnected, the
battery segment shows the level of the battery.
11. Bluetooth Icon: The Bluetooth icon will be lit solid when a device is
paired to Road Warrior.
12. Antenna: Adjust this FM antenna to get the best radio reception. Fold
this down when not using the radio and when moving the unit.
13. USB Charging Port: Connect your device's charge cable here to
charge it. USB charging only functions when the unit's power is turned
on.
Note: To charge smartphones and tablets faster,
put the device's screen to sleep.
14. NFC (near-field communication): Touch and
briefly hold your supported and enabled device to
the NFC logo to pair the device.
15. Auxiliary input: This stereo 3.5mm (1/8") input
can be used to connect a CD player, MP3 player,
or other audio source.
16. Microphone Input: This mono input accepts a
1/4" input such as a microphone, guitar, or other
musical instrument.
17. Power Cable Input (DC): Insert the included power cable here to power Road Warrior from a vehicle's 13.5V power
outlet.
18. Power Cable Input (IEC): Insert the included power cable here to charge the unit. Note that the Road Warrior can be
used with the power cable while it simultaneously charges the battery.
19. Power ON/OFF Switch: Turns Road Warrior on or off. Please note that while Road Warrior is connected to a power
source, it does not need to be powered on to charge the battery.
20. Charge LED: This illuminates when the unit is charging and goes out once charging is completed.
TOP PANEL
TABLET
REAR PANEL
VEHICLE DC
(for charging)
MP3
PLAYER
MICROPHONE
15 16
17
13.5V FUSE
T10AL 250V~
4
POWER
OUTLET
POWER
(for charging)
100-120V~50/60Hz 300W T6.3AL 250V~
13.5V 10A
13.5V FUSE
T10AL 250V~
1 2
9
8
7
6
10
11
12
13 14
20
100-120V~50/60Hz 300W T6.3AL 250V~
13.5V 10A
AC
3
4
5
19
18