JAVAC JAV-1021 Instrucciones De Seguridad Y Manual De Funcionamiento página 3

TUBE BENDER SET MULTI SIZE
REVERSE BENDING
01. Make sure the shaft on the Tube Bender
Body is at the original position by pulling
the Ratchet Handle away from the body.
02. Fit the appropriate size
Mandrel on to the shaft.
03. Fit the Cross Bar onto the Tube
Bender Body. Rotate the Support
Blocks facing the Mandrel.
04. Place the Copper Pipe into the Mandrel.
Press the Ratchet Handle to move the
cross bar and the pipe will start bending
when it touches the Mandrel.
05. Our JAVAC Edge Multi-size Tube Bender
comes with patented 90˚ indicator. When
the arrow is lined up with the size you are
bending, it means you have reached 90˚.
Support
Block
3
90˚ 90˚
Tube Bender Body
Shaft
90˚
Upward Indicator
Rachet Handle
Mandrel
Cross Bar
90˚