Urrea 6007A Instructivo Y Garantia página 5

3. Apply force on the wrench handle until blue follower
needle reaches desired torque. When force is released
orange pusher neddle will return to zero and the blue
memory follower needle will remain at torque applied.
4. For repetitive torque operations (once the zero has
been set as instructed above), the blue memory follower
needle can be returned to zero by use of the follower
needle knob. It is ready for the next operation.
IMPORTANT: When using the memory feature always
make sure that the blue follower memory needle is on
zero before torquing.
ELECTRIC SIGNAL DIAL
1. Turn bezel (C C W) until light and buzzer goes on.
2. Continue to turn bezel (C C W) until inner zero of
desired scale (English or Metric)is lined up with orange
pusher needle.
3. Now turn bezel (C W) until light goes off and orange
pusher needle is aligned with desired torque gradua-
tion in inner portion of scale orange pusher needle is
now preset to desired torque value.
4. Apply force to handle in the (C W) direction. When
the preset torqur value is reached the light and buzzer
will go on. When force on the handle is released orange
pusher needle will return to the preset torque value.
5. To change the preset torque value to another, turn
the bezel as required to the new torque value within
the same dial graduation and proceed as in step 4
above.
6. For CCW torque reverse directions in steps 1 through 5.
IMPORTANT: Always make sure that the electric contact
arm is zeroed.
Regulacion de la aguja de memoria en los modelos de
escala singular.
Setting memory follower needle on single scale models.
Aguja impulsora (naranja)
Pusher needle (orange)
Perilla de memoria para
la aguja seguidora
Memory follower
needle knob
Sentido de las
manecillas del
reloj
Perilla de memoria
para la aguja
seguidora azul /
Memory follower
needle knob (blue)
Marco
Bezel