ghd Air hairdryer Manual Del Usuario página 4

IMPORTANT: This ghd hairdryer is designed for 220-240V , 50-60Hz.
EN
Do not use with any other power supplies other than that specified on the
rating plate. Always check that the voltage of your electricity supply
matches the voltage of your ghd hairdryer.
1. Do not use this product with a voltage inverter or any device designed to
convert the electrical supply to 240V
2. Your ghd product is a class II electrical appliance.
3. Any error when connecting the ghd hairdryer can cause irreparable harm,
not covered by the guarantee.
warning: keep away from water
Do not store near water.
1.
Do not immerse or put under running
2.
water, even for cleaning purposes.
Do not reach for the appliance if it has fallen
3.
Not to be reproduced
into water.
Do not leave within the reach of children.
4.
The ghd hairdryer must be unplugged from the mains socket;
1. Before cleaning and maintenance procedures.
2. If it is not working correctly.
3. As soon as you have finished using it.
4. If you leave the room, even momentarily.
The ghd hairdryer is equipped with a heat-sensitive safety cut out device. In the event of
overheating (for example if the rear filter is blocked), the dryer's heater will stop automatically.
This will cause the temperature of the heater to become cold and hot intermittently. Isolate the
dryer from the mains supply and clean the filter. If problems persist, contact ghd Jemella Ltd,
see contact details.
If your ghd hairdryer has broken or does not work correctly immediately stop using and contact
ghd (Jemella Ltd), see contact details.
Your ghd hairdryer can only be repaired using specialist tools and by qualified experts at ghd.
CAUTION: Failure to comply with these safety precautions may result in electric shock or
other injuries!
5
from a different source.
using your ghd hairdryer
1. After washing your hair, towel-dry it thoroughly.
2. Do not allow excess water from your hair or any other source to come into contact with the ghd hairdryer.
3. For fast drying, use the ghd flight without the styling nozzle.
4. Never cover the blower or intake opening.
5. Ensure that the air inlet filter is not and does not become blocked with fluff or hair.
6. When drying or styling, do not allow any of your hair to cover or come into contact with the
air inlet filter at the back of your dryer.
The upper switch on the back of the handle is for
temperature setting:
= Maximum heat
= Medium heat
= Cold air
The lower switch on the back of the handle is to set
the fan speed:
= Max Speed
= Medium Speed
= Off
Any temperature and speed setting can be
combined. The Ionic Technology function is
always on.
Cool Shot Button: The Cool Shot Button can be
switched on at any setting. It's ideal to fix your style
and shape your look.
Nozzles: A concentrator nozzle can be used to
achieve better styling control through concentrating
the air flow.
Note: The fit of a cold nozzle can be tight,
particularly when the dryer and nozzle are new.
6