Painted Combics "Ip44; Signum Models With Unicom - Sartorius YDO02C-232 Instrucciones De Instalación

Painted Combics "IP44"

and Signum models with
UniCOM interface
25-pin D-Submini (DB25S) with screw
connection
Front view
Required interface connector
(recommended):
25-pin D-Submini (DB25) with shielded
cable clamp assembly and shield plate
(Amp type 826 985-1C) and fastening
screws (Amp type 164868-1)
RS-232 mode:
YDO0...-232 (Option A1):
Pin 1: GND
Pin 2: TxD
Pin 3: RxD
Pin 4: GND
Pin 5: CTS
Pin 6: Not in use
Pin 7: GND
Pin 8: GND
Pin 9: Not in use
Pin 10: Not in use
Pin 11: + 12 V operating voltage for
Sartorius printer
Pin 12: RESET_OUT
(Periphery restart)
Pin 13: 5 V switched
(e.g. for barcode reader)
Pin 14: GND
Pin 15: Universal In
Pin 16: Control output: "lower"
Pin 17: Control output: "same"
Pin 18: Control output: "higher"
Pin 19: Control output: "set"
Pin 20: DTR
Pin 21: GND
Pin 22: Not in use
Pin 23: Not in use
Pin 24: E xt. transmitting
voltage output
+15 ... +25 V
Pin 25: 5 V_Output
RS-422 mode: YDO0...-422
(Option A2):
Pin 1: GND, electrically isolated
Pin 2: TxD+, electrically isolated
Pin 3: RxD+, electrically isolated
Pin 4: Not in use
Pin 5: RxD-, electrically isolated
Pin 6: Not in use
Pin 7: GND, electrically isolated
Pin 8: GND, electrically isolated
Pin 9: Not in use
Pin 10: Not in use
Pin 11: Not in use
Pin 12: Not in use
Pin 13: Not in use
Pin 14: Not in use
Pin 15: Not in use
Pin 16: Not in use
Pin 17: Not in use
Pin 18: Not in use
Pin 19: Not in use
Pin 20: TxD-, electrically isolated
Pin 21: GND
Pin 22: Not in use
Pin 23: Not in use
Pin 24: Ext. transmitting voltage input
+ 15 ... +25V, not electrically
isolated
Pin 25: Not in use
RS-485 mode: YDO0...-485
(Option A3):
Pin 1: GND, electrically isolated
Pin 2: TxD/RxD+
Pin 3: RxD+, electrically isolated
Pin 4: Not in use
Pin 5: RxD-, electrically isolated
Pin 6: Not in use
Pin 7: GND, electrically isolated
Pin 8: GND, electrically isolated
Pin 9: Not in use
Pin 10: Not in use
Pin 11: Not in use
Pin 12: Not in use
Pin 13: Not in use
Pin 14: Not in use
Pin 15: Not in use
Pin 16: Not in use
Pin 17: Not in use
Pin 18: Not in use
Pin 19: Not in use
Pin 20: TxD/RxD–
Pin 21: GND
Pin 22: Not in use
Pin 23: Not in use
Pin 24: Ext. transmitting voltage input
+ 15 ... +25V, not electrically
isolated
Pin 25: Not in use
Current/voltage interface:
YDO0...-AO (Option A4)
Pin 1: GND, electrically isolated
Pin 2: Not in use
Pin 3: Not in use
Pin 4: Not in use
Pin 5: Not in use
Pin 6: V_out (+), electrically isolated,
for voltage interface,
0 to 10 V
Pin 7: V_in (-), electrically isolated,
for voltage interface,
0 to 10 V
Pin 8: Not in use
Pin 9: I_out (+), electrically isolated,
for current interface,
(0/4 to 20/24 mA)
Pin 10: I_in (–), electrically isolated,
for current interface,
(0/4 to 20/24 mA)
Pin 11: Not in use
Pin 12: Not in use
Pin 13: Not in use
Pin 14: GND, electrically isolated
Pin 15: Not in use
Pin 16: Not in use
Pin 17: Not in use
Pin 18: Not in use
Pin 19: Not in use
Pin 20: Not in use
Pin 21: Not in use
Pin 22: Not in use
Pin 23: Not in use
Pin 24: Not in use
Pin 25: Not in use
Digital input/output module
YDO0...-DIO: (Option A5)
Pin 1: OUT1_HIGH
Pin 2: OUT2_HIGH
Pin 3: OUT3_HIGH
Pin 4: OUT4_HIGH
Pin 5: OUT5_HIGH
Pin 6:
Pin 7: IN1_HIGH
Pin 8: IN2_HIGH
Pin 9: IN3_HIGH
Pin 10: IN4_HIGH
Pin 11: IN5_HIGH
Pin 12:
Pin 13:
Pin 14: OUT1_LOW
Pin 15: OUT2_LOW
Pin 16: OUT3_LOW
Pin 17: OUT4_LOW
Pin 18: OUT5_LOW
Pin 19:
Pin 20: IN1_LOW
Pin 21: IN2_LOW
Pin 22: IN3_LOW
Pin 23: IN4_LOW
Pin 24: IN5_LOW
Pin 25:
17