Installation - Intermatic Grasslin talento smart Manual Del Usuario

Installation

Connecting the electricity
Risk of fatal electric shock!
Improper assembly and installation of the device can lead to life-threatening electrical
WARNING!
voltages.
− Only allow a qualified electrician to install and connect the device.
Personnel:
• Qualified electrician
Material:
• DIN rail (15 mm x 7.5 mm)
• DIN rail (15 mm x 12.5 mm)
Prerequisite:
• The terminals for the flexible wires must have a cross-section between 1 mm² and 2.5 mm².
Fig. 5: Installation on a DIN rail
1. Place the LAN module on the DIN rail (Fig. 5) from above and press it back until it locks into place.
Connecting the electricity
2. Strip the insulation from the wires.
• Stripping length: 8 mm
EN
39