Electrical Connection; Design And Function; Overview - Caso WK2500 Manual Del Usuario

12.5 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
 Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
no damages occur in the device. If in doubt, ask your qualified electrician.
 The electrical outlet must be protected by a 16A safety cut-out switch.
 The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fire that is involved with this.
 Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
 The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.
 An extension cord can be used if treated with caution. Tha wattage of the extension
cord must be at least as high as the wattage of the device.
 For additional protection, we recommend the use of a power outlet with a rated current
of 10A. To avoid circuit overload, do not operate another high wattage appliance on the
same circuit.

13 Design and Function

In this chapter, you'll find important information on the design and function of the device.

13.1 Overview

1. Spout
2. Button for opening of the lid
3. Lid
4. Water gauge
5. Handle
6. Power base
7. Control panel
29