Technical Data - Adler AD 1234 Manual De Uso

16. The kettle must only be used with the provided base.
17. CAUTION: Before lifting the kettle from the base make sure that the kettle is turned off.
18. This equipment is intended for domestic and similar use, such as: staff kitchens in
stores, offices and other work environments, utility rooms, by customers in hotels, motels
and other residential environments of this type, in bedrooms and dining rooms.
19. The device has to be turned off after every use.
20. In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
21. This appliance is designed for boiling water only.
22. Be careful while boiling water. Do not touch body of the kettle and cover. Do not open
the cover while boiling water or just after it boiled.
23. Steam coming out of the kettle during and after boiling water remains hot. Open the lid
with care. Keep children out of reach of woring kettle.
25. Move the kettle only by holding it by handle.
26. Use kettle only with original base.
27. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.
28. Never switch on kettle without water.
29. Never use kettle without filter or with open cover (automatic shutdown will not work).
30. Do not immerse the kettle's housing nor the base in water or any other liquids.
31. Descale your kettle regularly. Using kettle with heating element covered by scale may
cause damage.
DESCRIPTION
1 - plastic housing
4 - rotating base
USING THE ELECTRIC KETTLE
BEFORE FIRST USE: Fill up the kettle with water, boil and pour. Repeat three times. To remove possible scent of manufactory, please
boil few times water.
1. Fill the kettle with water. Make sure that heating plate is fully immersed in water.
2. Place the appliance on the flat, even and heat resistant surface.
3. Plug the kettle to the 230~50Hz mains, press ON/OFF switch. Indicator lamp will light.
4. After boiling water the kettle will automatically switch off.
5. Before taking the kettle out of the base make sure it is switched off.
6. The kettle can manually be switched off in any time by ON/OFF switch.
7. Keep lid closed during boiling process. Or the kettle won't automatically switch off.
8. After boiling, time demanded for the thermostat to be ready is 2 minutes. After this time kettle can be switched on again.
9. Regularly remove limestone sediment inside the kettle. Sediment may cause overheating of the kettle, shorten life cycle and cancel
guarantee. Use mixings available in household stores or apply citric acid.
10. Switching empty kettle, or with insufficient level of water, will cause automate switching off the kettle. Wait till cool down the kettle,
pour enough water and after few minutes switch the kettle on.
CLEANING OF MAINTENANCE
Regularly descale the kettle. Descaling doesn't belong to guarantee service. Lack of regular descaling causes damage of the elements
of the appliance and cancels warranty of the product. Use descaling mixture to descale the kettle.

TECHNICAL DATA:

Capacity max: 1,7l
Voltage: 220-240V ~50Hz
Power: 2000W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
2 - ON / OFF switch
5 - the lid
min: 0,5l
Device is made in class I of insulation and has to be connected only to power outlet
with ground circuit. Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
3 - indicator lamp
6 - handle
4
7 - lid lock