E D E N | M E T R O M I X S E R I E S |
The EM25 combo amplifier provides a multi instrument amplifier that not only delivers 25W of power but also increased tone shaping
flexibility. With separate volume controls the EM25 has a shared EQ section which offers the ability to detail the tone settings for the
instrument inputs. To ensure the tonal flexibility can be fully utilised the EM25 also uses a extended range speaker to achieve great
definition at both high and low tone frequencies. In addition the inclusion of separate gain (input volume) and master volume controls
introduces the differences between preamp and power amp volume control.
EM25 Front Panel Navigation:
1. Illuminated Eden logo; Illuminates when unit is switched on.
2. Line input; Connect your MP3 player or other device. You can
control the volume of this signal on your input device.
3. Input 1; Plug in instrument 1 to the amplifier.
4. Input 2; Plug in instrument 2 to the amplifier.
5. Gain / Volume Control; Adjust the volume level for instrument 1.
6. Gain / Volume Control; Adjust the volume level for instrument 2.
7. Bass Control; Increase or decrease the level of low
frequencies applied.
8. Middle Control; Increase or decrease the level of mid
frequencies applied.
9. Treble Control; Increase or decrease the level of higher
frequencies applied.
10. Master; Set the output volume for the amplifier.
11. Headphone Level Control; Adjust the level for the
headphone Out 1.
12. Headphone Level Control; Adjust the level for the
headphone Out 2.
13. Headphone Output 1; Plug in headphones.
14. Headphone Output 2; Plug in headphones.
15. Power Switch; Turn your amplifier off and on.
N E V E R C O M P R O M I S E
E M 2 5 - 6
EM25 Quick Start Guide
EM25 Back Panel Navigation:
1. RCA input; Input signal from a tape / cd or other compatible
2. Stereo Line Out; Take a mixed output of all input signals.
|
8
T M
device. You can control the volume of this signal on your
input device.