Troubleshooting - auna AV2-CD509 Manual Del Usaurio

TROUBLESHOOTING

Problem
CD Does not play
No sound / power
The function buttons do
not respond
Possible cause and suggested solution
Check that you are in CD mode. Short press the Mode
button on the Micro or on the remote control to
change the mode (check the display).
Take out the CD and check that it is not marked or
scratched. Damaged CDs cannot be played in the
Micro or may skip or not rotate correctly.
Please check that you are using an original audio CD
and not a copy. Often copied CDs will not play.
Adjust the volume using the Volume + on the Micro or
the Vol + button on the remote control.
Check that the sound is not muted. Short press the
Mute button on the remote control.
You may have headphones connected. Either use the
headphones to listen to your Micro or unplug the
headphones.
Check that mains power wall socket is switched
on and that the Micro is not in Standby mode.
Check that you are trying to use the function buttons
for the mode that you are in.
EN
17