THOMSON DS150CD Manual Del Usaurio página 21

Auxiliary Input RCA (Requires an RCA cable)
1. Connect an RCA cable to the Auxiliary Input. Connect the other end of the RCA cable to the audio
output on your DVD player, stereo system, gaming system or television.
2. Press the power button to turn the unit on.
3. Press the SOURCE button to switch to Aux In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
Using the USB/SD input
1. Plug your USB flash drive or SD card to the USB socket or SD slot.
2. Press SOURCE button to select USB or SD mode, the unit can play automatically. If not, press
3. Press the /
4. Press the VOL+/VOL– to adjust the volume.
Remarks:
• USB/SD port is easy to sensitive equipment, will cause the equipment work is not stable.
USB charging
There is a USB charger on the top of the unit to charge small devices such as smartphones that can
be charged via USB.
Output power: 5V/2.1A max
Bluetooth Mode
A. Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different
cell phones. Please refer to the user manual of your cell phone for further information. The general
pairing steps are as follows:
1. Keep DS150CD and Bluetooth cell phone within 1 meter when pairing.
2. Press button, and press the SOURCE to select the Bluetooth mode.
3. Switch on your cell phone's Bluetooth function and search for Bluetooth devices. After the search
is completed, select "DS150CD" from the Bluetooth device list.
4. According to indication, enter password or PIN No: "0000" and press "Yes" or "confirm".
5. After successful pairing, select "DS150CD" from the Bluetooth device list and press "connect".
B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual of your
Bluetooth transmitter for further information. The general pairing steps are as follows:
1. Keep DS150CD and Bluetooth transmitter within 1 meter when pairing.
2. Press button, and press the SOURCE to select the Bluetooth mode.
3. Switch on your Bluetooth transmitter and let it enter pairing mode.
4. The transmitter will search and connect with DS150CD automatically. After successful connecting,
the Bluetooth voice will change when connected successfully.
Remarks:
• DS150CD will return to pairing mode automatically after disconnecting from a Bluetooth device.
C. Music Playback
Connecting with a A2DP cell phone or Bluetooth transmitter
1. Connect your cell phone or Bluetooth transmitter with DS150CD.
2. You can listen to your music from DS150CD now when playing it back.
3. Press Vol+ to turn up the volume, press Vol- to turn down the volume.
4. Press to skip to the previous song.
5. Press to skip to the next song.
to select track.
- EN 8 -
.