Program Override - Peco Performance PRO School Serie Manual De Instrucciones

PRoGRaM oVeRRIDe

PRoGRaM oVeRRIDe PRoGRaM oVeRRIDe
Example shows how to select a Cool Setpoint for a
12-hour period in System Auto mode.
i
note: Setpoints available depend on the
system mode selected (see "Select System
Preferences"). Override display options
can be defined in Service Menus.
i
note: The installer setup can limit the
length of time for an override to 1, 2, 3 or
4 hours beyond the current time.
PRess anY KeY To beGIn
Override allows application of temporary heat
or cool settings.
1. Press Teacher/Override, or
▲/ ▼key. note: Setpoint fl ashes.
"Hold until" time appears and is changed
to show length of override (up to the
maximum hold time specifi ed in Service
Menu 395).
2. Press ▲/ ▼to select a Cool Setpoint,
then press Next.
3. Press ▲/ ▼to select a Heat Setpoint,
then press Next.
4. Press ▲/ ▼to adjust time (in 15-minute
periods) until override remains in effect.
5. Press to save changes and exit.
Done
note:
Override
effective until selected time period ends.
remains (fl ashing)
22