RATING & SPECIFICATIONS
Model:
Working Voltage Range:
Frequency:
Dielectric Strength:
Safety:
Operating Environment:
Operating Altitude:
Battery:
Dimensions:
Weight:
Instrument complies with insulation category (overvoltage category III).
Pollution degree 2 accordance with IEC-664. Indoor use. Industrial use.
CAT III equipment is designed to protect against the transients in the equipment
in fixed installations, such as distribution panels, feeders and short branch
circuits for lighting systems in large buildings.
Equipment protected by double insulation.
Maintenance
Do not attempt to repair this tester. It contains no user-serviceable parts. Repair
or serving should only be performed by qualified personnel.
Cleaning
• Remove grease and grime with a clean, dry cloth.
• Do not use abrasives or solvents.
Battery Replacement
Packaged complete with two button cell batteries and operating instructions. Install
batteries before use.
!
WARNING: DO NOT OPERATE WITHOUT BATTERY COVER IN
PLACE!
Warranty:
This tester is warranted to the original purchaser against defects in material and
workmanship for one year from date of purchase. During this warranty period, IDEAL
INDUSTRIES, INC. will, at it' s option, replace or repair the defective unit, subject to
verification of the defect or malfunction.
This warranty does not apply to defects resulting from abuse, neglect, accident,
unauthorized repair, alteration, or unreasonable use of the instrument.
Any implied warranties arising out of the sale of an IDEAL product, including but not
limited to implied warranties of merchantability and fitness for a particular purpose, are
limited to the above. The manufacturer shall not be liable for loss of use of the instru-
ment or other incidental or consequential damages, expenses, or economic loss, or
for any claim or claims for such damage, expenses or economic loss. State laws vary,
so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary form state to state.
IDEAL INDUSTRIES, INC.
Sycamore, IL 60178, U.S.A.
www.idealindustries.com
ND 2287-6
61-063
40-600 VAC max to ground
50/60Hz
2000V, 1 minute, 100uA or less
during dielectric strength test
IEC61010-1 Cat III - 600V
32° to 104° F (0° to 40° C).
80% RH max. 50% RH above 31° C.
2000m (6562 ft.)
Two (2) 1.5V button type batteries,
#61-201 (IEC #LR-44,
NEDA # 1166A)
5.2"H x 1"W x .8"D
(130 x 26 x 20mm)
1.4 oz (40g)
Voltage Testers
10DB
Made in China
Cat III - 600V
N12966