HoMedics Mirra ZEN Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO USE
INSTRUCTIONS
1. Familiarize yourself with the pump. The switch located
on the front of the pump controls the pump speed.
The speed is indicated by a plus (+) and minus (-)
sign. To increase the speed, move the switch slowly
to the left in the direction of the plus sign. At its
highest speed level, the switch will cease to move
any farther. To decrease the pump speed for less
water flow, move the switch to the right toward the
minus sign. At its lowest speed, the switch will cease
to move any farther.
2. Clip the LED light into the plastic ring located inside
the fountain top.
3. Insert the tube into the pump.
4. Fill base with water up to the fill line. Keep the
water filled to the suggested level at all times for
optimum performance.
5. Set the fountain top onto the base.
6. Starting with the largest piece, place slate pieces
onto the fountain top.
7. Attach the AC adapter jack to the power cord. DO NOT
plug into an outlet at this time.
8. Rinse the rocks with water. Arrange the rocks on
the platform.
9. Set the fountain on a level, waterproof surface.
10. Plug the cord into a 120V household outlet. The switch
located on the power cord controls the fountain. If
pump doesn't operate, click the power button once
to turn on and once more to turn off. NOTE: Ensure
that the electrical cord loops below the electrical
outlet to form a "drip loop." This will prevent water
from running down the cord into the electrical outlet.
11. For the best results, operate with the pump
completely submerged. Keep the water level at
the fill line at all times.
TO CLEAN
1. To clean the pump: Unplug from electrical outlet. Use
a small brush or stream of water to remove any debris.
2. To keep water clean: Periodically change water
and clean the product according to the water
condition. Over time, fountain water and the
fountain itself become dirty. We suggest cleaning
and
exchanging
longevity of the fountain.
3. To clean off hard water deposits on the base: Soak
the container in a mixture of vinegar and water to
clean and remove any mineral buildup.
www.homedics.com
water
weekly
to
increase
US: 1-800-466-3342 CAN: 1-888-225-7378
2
3
6
7
8
DRIP LOOP
1
FILL LINE
IB-WFL200

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mirra wfl-200

Tabla de contenido