Virutex RTE46L Manual De Instrucciones página 8

The machine is delivered from the factory fully
lubricated and will not require any special care for the
duration of its useful life.
Always clean the machine carefully after each use,
using a dry air jet.
Keep the feed cable in perfect working order.
Keep the ventilation and refrigeration openings of the
machine clean and free of obstructions.
12. N OISE LEVEL AN D VIBRATION S
The noise and vibration levels of this device have
been measured in accordance with E uropean standard
EN 60745-2-4 and E N 60745-1 and serve as a basis
for comparison with other machines with similar
applications.
The indicated vibration level has been determined for
the device's main applications and may be used as
an initial value for evaluating the risk presented by
exposure to vibrations. However, vibrations may reach
levels that are quite different from the declared value
under other application conditions, with other tools or
with insufficient maintenance of the electrical device
or its accessories, reaching a much higher value as a
result of the work cycle or the manner in which the
electrical device is used.
Therefore, it is necessary to establish safety measures
to protect the user from the effects of vibrations,
such as maintaining both the device and its tools in
perfect condition and organising the duration of work
cycles (such as operating times when the machine is
subjected to loads, and operating times when working
with no-load, in effect, not in use, as reducing the
latter may have a considerable effect upon the overall
exposure value).
13. WARRAN TY
All VIRUT E X power tools are guaranteed for 12 months
from the date of purchase, excluding any damage
which is a result of incorrect use or of natural wear
and tear on the machine. All repairs shouls be carried
out by the official VIRUT E X technical assistance service.
14. RECYCLIN G ELECTRICAL EQUIPMEN T
Never dispose of electrical equipment with domestic was-
te. Recycle equipment, accessories and packaging in ways
that minimise any adverse effect on the environment.
Comply with the current regulations in your country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the accom-
panying information, at the end of the product's useful
life it must not be disposed of with other domestic waste.
In accordance with E uropean Directive 2002/96/E C, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUT E X reserves the right to modify its products
without prior notice.
FRANÇAI S
PON CEUSE ROTORB I TA L E
RT E4 6 L /RT E1 4 6 L
1. IN STRUCTION S DE SÉCURITÉ POUR
UN E BON N E UTILISATION DE LA PON CEUSE
1. Avant de connecter la machine vérifier que la
tension d'alimentation correspond à celle qui est
indiquée sur la plaque des caractéristiques.
2. Danger, éloigner la main de l'aire de travail.
Ne pas prendre la machine par-dessous lorsqu'elle est
en train de fonctionner.
3. Inspecter et enlever les clous de la surface à poncer,
avant de commencer à travailler.
4. Déconnecter la machine du réseau électrique avant
d'effectuer une opération de maintenance.
5. Ne jamais poser un outil électrique avant l'arrêt
complet de ses parties mobiles.
6. Ne jamais utiliser la ponceuse dans un endroit où se
trouveraient des liquides ou dans un lieu excessivement
humide.
7. Si vous utilisez des abrasifs adhésifs, il est conseillé
d'enlever le disque lorsque le travail est fini. E n effet,
après quelques jours, il serait difficile de le décoller
du plateau. N'essayer pas de recoller sur le plateau
un disque en papier abrasif car s'il a été décollé, son
pouvoir adhésif est réduit. Il pourrait donc provoquer
un décollement du disque abrasif et devenir dangereux
pour l'usager. Avant de coller un nouveau disque
abrasif, vérifier que le plateau est parfaitement propre.