Assembly Instructions; Tools Required - Brave EZ Split PCLS13 Manual Del Propietario Y Operario

Tools required:

screwdriver, phillips head screwdriver, 7/16" wrench, two 1/2" open-end wrenches, utility
knife, and a long-necked funnel.
Fluids required:
fluid (use either 10W or AW-32 hydraulic oil or Dexron VI, Mercon V, or equivalent
transmission fluid, but do not mix.), and lead-free gasoline.
Instructions for filling and starting procedures for your log splitter.
1. Using a utility knife, cut along the four corners of the shipping box so the sides lay flat
on the ground.
assembly much easier.
2. Cut the plastic strap around the parts box and cylinder. Open the box and make sure
you have the following parts.
Part Number
Front Leg
BR051003/001031
82091
BR001325
Cylinder Mounting
BR051004
82087
BR001325
Tires
BR008306
82511
Valve Handle
BR004101A
3. Cut the nylon tie(s) that hold the cylinder to the rail.
800-350-8739
Hammer, needle nosed pliers, 10" crescent wrench, flathead
Motor oil - per engine specifications, 154 oz. (4.5 liters) hydraulic
This provides full access to your EZ Split log splitter and makes
Description
Leg/Rubber Foot
Bolt, 5/16-18 x 1" long
Locknut, 5/16-18
Cylinder Retainer Plate
Bolt, 5/16-18 x 3/4" long
Locknut, 5/16-18
Tire, 8 inch
Push-On Nut
Handle Kit Assembly

Assembly Instructions

Qty
1
1
1
2
4
4
2
2
1
9
Refer to the Start-up
Front Leg
Cylinder Mounting
Tires
Valve Handle
Brave
EZ-23