Publicidad
3
Attach Clips and Covers
3-1
Install cable management
[04]
[06]
[22]
[05]
(F)
10
[23]
Slide the arms of the wall plate [01] together and insert the slide lock
[27] into place. This will lock the arms into full extension making the
following steps easier.
Use the 1⁄8 in. hex key [25] and four screws [22] to secure the rear panel
(R) of the cable management assembly [05] between the lower cover
[06] and the wall plate [01].
Install the front panel (F) of the cable management system to the
back side of the face plate [01] using two screws [23].
Use the 1⁄8 in. hex key [25] and screws [22] to mount the upper cover.
[22]
[27]
[25]
[05]
(R)
6903-002007 <02>
Publicidad
