Reviewing Blood Glucose Day Average Results
2. Press M to review 14-, 21-, 28-, 60- and 90- day average results stored
in memory.
3. Exit the meter memory. Press M after the 90-day average is displayed
and the meter will turn off.
NOTE:
• Any time you wish to exit the memory, hold press M down for 5 seconds or
leave the meter idle for 3 minutes. The meter will turn off automatically.
• Control solution results are NOT included in the day average.
• If there are no records in memory, "---" displays when you recall the test results
or review the average result.
1. Press and release M Button.
When " " appears on the display,
keep pressing M for 3 seconds until the
flashing "
M and then your 7-day average result
measured in general mode will appear on
the display.
" appears. Release
27