AquaPRO 33011-3 Manual Del Usuario página 4

MATERIALS REQUIRED (NOT INCLUDED)
NOTE:
Parts shown below not to scale.
Threaded Adapter
(Pipe to Pump)
1-1/4" or 1-1/2"
check valve
SPECIFICATIONS
Power supply
Liquid temp. range
Discharge size
Sump basin
NOTE: Do not reduce size of discharge pipe or hose below 1-1/4 in. diameter. If discharge is too small, pump will
overheat and fail prematurely. This pump is designed for use in a residential sump only. Only pump water with this
pump.
INSTALLATION
1-1/4'' or 1-1/2''
ABS or PVC Pipe
ABS or PVC
Cement
(to match the pipe)
115V, 60 HZ., 15 Amp Circuit
35°F to 77°F (1°- 25°C)
1-1/2 in. FNPT or 1-1/4 in. FNPT (with adaptor)
Min. 14 in. (356 mm) diameter, 18 in. (457 mm) depth for tethered switch
Min. 10 in. (254 mm) diameter, 14 in. (356 mm) depth for vertical switch
4
Thread Tape
1-1/4" or
1-1/2"90°
Elbow