T
ROUBLESHOOTING
C
T
P
HECK
HESE
OINTS
Won't Fill
Won't Tumble
Door Locked Shut;
Will Not Open
Freshening
Your Washer
Is Noisy
For further assistance, call Maytag Services, LLC toll-free at 1-800-688-9900 USA.
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
.
CONT
I
Y
W
F
OUR
ASHER
• Be sure the door is tightly closed.
• Plug cord into a live electrical outlet.
• Check fuse or reset circuit breaker.
• Press the START/PAUSE pad.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• Open and close the door, then push the START/PAUSE pad.
• Check fuse or reset circuit breaker.
• Close the door and press the START/PAUSE pad. For your safety, the washer will
not tumble or spin unless the door is closed.
• Press the START/PAUSE pad to stop the machine.
• It may take a few moments for the door lock mechanism to disengage.
• See Cleaning the Interior, page 8.
• Washer should be leveled properly as outlined in installation instructions.
• Check that the leveling leg lock nuts are tightened.
• Be sure rubber feet are installed on leveling legs.
• Weak floors can cause vibration and walking.
• For information on normal operating sounds, see page 13.
...
11