Maintenance
Dust bin and filters
Dust bin
Empty the dust bin after each
use.
Check that the vacuum is turned off and unplugged. Remove the
accessories and the removable wand from the motor unit for a
better grip. Open the filter cover on the bottom of the bin and empty
it (Figure 1).
NOTE: Take care when opening the cover as the dust could fall out on to the floor.
Motor unit
To clean the dust bin, release it by pressing on A (Figure 1). Then twist
the bin in an anti-clockwise direction. Empty the bin and carefully
remove the dust from the cyclone system (Figure 2) using a dry cloth.
Figure 1
A
13
EN
Figure 1
Figure 2