Installation; Displays; Status Displays - Alpha IP HAP 21001 Manual De Instrucciones

InstallationDisplays /

6 Installation

The ALPHA IP Access Point must be positioned with a
minimum distance of 50 to your WLAN router.
The Alpha IP Access Point can be positioned on a table or installed
to a wall.
1. For wall installation drill two holes with a diameter of 5 mm
and a distance of 7.5 cm.
2. Insert the supplied dowels into the bores.
3. Screw in the supplied screws so that they protrude 4 mm from
the wall.
4. Hang the Alpha IP Access Point onto the screws.
20

7 Displays

7.1 Status displays

Display Meaning
Continuous Starting process
lighting in
orange
Quick flashing Connection
in blue establishment to
the server
Continuous Standard opera-
lighting in blue tion, connection
to server OK
Long lighting in Process confirmed
green
Alternate long Updating
and short flash-
ing in orange
Meaning
Let the process finish.
Observe the flashing
behaviour.
Wait until the the
process is finished.
Operation can be
continued.
Confirmation of per-
formed set-up.
Wait until the the
process is finished.