Error Indications; Cleaning; Resetting Factory Settings - Alpha IP HAP 21001 Serie Manual De Instrucciones

Display Meaning
Continuous Standard opera-
lighting in blue tion, connection
to server OK
Long lighting in Process confirmed
green
Alternate long Updating
and short flash-
ing in orange

7.2 Error indications

Display Meaning
Quick flashing No connection to
in yellow network or router
Continuous No Internet con-
lighting in nection
yellow
Quick flashing Update error
in red
Meaning
Operation can be
continued.
Confirmation of per-
formed set-up.
Wait until the the
process is finished.
Clean the device with a soft, clean, dry, and lint-free cloth. The cloth
may be moistened with lukewarm water for the removal of heavier
contamination. Use a solvent-free cleaning agent for cleaning.
Solution
Connect the Access
All settings will be lost when the factory settings are restored.
Point to the router.
The factory setting of the individual Alpha IP components must
Check the Internet
also be restored.
connection and the
1. Disconnect the Access Point from the power supply. Pull the
firewall settings.
Check the server and
2. Connect the base station again to the power supply and press
Internet connection.
Restart the Access
Point by shortly dis-
3. Release the System key.
connecting it from the
power supply.
4. Press the System key again for 4 seconds until the LED lights
Display Meaning
Quick flashing Preliminary step
in orange for restoring the
factory settings
Long lighting Reset failed
in red

8 Cleaning

9 Resetting factory settings

mains plug for this.
the System key simultaneously for 4 seconds until the LED
flashes rapidly in orange.
up in green.
Resetting factory settings
Solution
Press the System key
again for 4 seconds
until the LED lights up
in green.
Repeat the process.
17