Nice E MAT ST 324 Instrucciones Y Advertencias Para La Instalación Y El Uso página 16

6.C - Adjustment of "Wind" climate sensor (ref. paragraph 6.2.3)
At the factory, the intervention threshold to is set at level 3 and to change it you must take the following steps.
Before starting the procedure, bring the awning to the midpoint of its stroke.
01. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02. Keep the t key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03. Briefly press the s key a few times, depending on the level you want to set for wind threshold:
1 press = wind at 5 Km/h
2 presses = wind at 10 Km/h
3 presses = wind at 15 Km/h (factory settings)*
4 presses = wind at 30 Km/h
5 presses = wind at 45 Km/h
After about 10 seconds, the motor performs the number of movements indicated by the level number selected. Note – If this does not occur, cancel the proce-
dure. this way, the adjustment is completed without changing the factory setting.
04. Keep the n key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
01
5
sec.
03
x 1 = wind at 5 Km/h
x 1 = vento a 5 Km/h
x 2 = wind at 10 Km/h x 2 = vento a 10 Km/h
x 3 = vento a 15 Km/h( * )
x 3 = wind at 15 Km/h (*)
0,5 x 4 = vento a 30 Km/h
x 4 = wind at 30 Km/h
sec.
x 5 = vento a 45 Km/h
x 5 = wind at 45 Km/h
Notes • When performing the procedure, you can cancel it at any time by keeping the n and t keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements. • If you use a sensor equipped with a "trimmer", you must read the sensor instructions and ad-
just the threshold directly on the sensor.
6.D - Programming the movement (Ascent or Descent) that the motor must perform
automatically when it starts to rain (ref. paragraph 6.2.3)
Before starting the procedure, bring the awning to the midpoint of its stroke.
01. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02. Keep the t key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
04. Programme the movement that the motor must perform automatically when it starts to rain, by selecting one of the following options:
• to programme the Raising of the awning: keep the s key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
• to programme the Lowering of the awning: keep the t key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
01
5
sec.
=
=
Note – When performing the procedure, you can cancel the programming at any time by keeping the n and t keys pressed simultaneously for 4 seconds Alternatively,
do not press any keys and wait 60 seconds for the motor to perform 6 movements.
15 – English
02
2
10
sec.
02
2
04
5
sec.
04
5
sec.
3
5
sec.
04
1 /
2 /
3 /
?
4 /
5 /
3
5
sec.
3
3
3
5
sec.
03
2
5
sec.