Set Time And Date - ADE WS 1823 Instrucciones De Operación

‚ Start the data transfer manually, if necessary; see
"Connecting the outdoor sensor manually".

Set time and date

If there is more than approx. 20 seconds between
two pushes of a button, the setting process
automatically ends and you will have to repeat it.
1. Press SET.
A year will flash on the display.
2. Use UP/MEM or DOWN/CF to set the current year.
3. Press SET.
4. Proceed as described to set the following values:
− Month
− Day
− Hours
− Minutes
− Time format
Finally, press SET to conclude the procedure.
If you select "12 Hr" as the time format, morning
hours will be shown as AM and afternoon hours
as PM on the display.
Thermometer/Hygrometer WS 1823
37