Safety Instructions - Neumann.Berlin KH 80 DSP Instrucciones De Seguridad

Important safety
instructions
1. Read these safety instructions.
2. Keep these safety instructions. Always in-
clude these safety instructions when passing
the product onto third parties.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Only clean the product when it is not con-
nected to the power supply system. Clean
only with a dry cloth.
7. Do not block any ventilation openings. In-
stall in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other ap-
paratus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the po-
larized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safe-
ty. If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked
on or pinched, particularly at plugs, conve-
nience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the appa-
ratus has been damaged in any way, such as
power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into
the apparatus, when the apparatus has been
exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
15. Warning: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain
or moisture and objects filled with liquids,
such as vases, should not be placed on this
apparatus.
16. To completely disconnect this apparatus
from the AC mains, disconnect the power
supply cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall
remain readily accessible.
Installation
• Ensure that the room in which you use this
product is wired in accordance with the local
electrical code and checked by a qualified in-
spector.
• Only use the product indoors.
• Do not install the product in hot, humid, or ex-
cessively dusty locations, in direct sunlight or
in locations where it is exposed to externally
generated vibrations.
• Do not place burning objects (e.g. candles) on
top of or near the product.
• If condensation has formed on the product,
e.g. because it was moved from a cold environ-
ment to a warm one, allow the product to ac-
climatize to room temperature before using it.
• Do not overload wall outlets and extension
cables as this may result in fire and electric
shock.
EN
KH 80 | 7