Quick Wizard: Capacities (Energy Metering); Space Heating/Cooling Control - Rotex RHBH04CA3V Manual De Instalación

Energy metering
# Code
[A.2.2.8] [D-08] Optional external kWh meter 1:
[A.2.2.9] [D-09] Optional external kWh meter 2:

4.2.4 Quick wizard: Capacities (energy metering)

# Code
[A.2.3.1] [6-02] Booster heater capacity [kW]
[A.2.3.6] [6-07] Bottom plate heater capacity [W]

4.2.5 Space heating/cooling control

Leaving water temperature: Main zone
# Code
[A.3.1.1.1] N/A Set point mode:
[A.3.1.1.3] [1-00] Weather-dependent curve (heating):
[1-01]
T t
[1-02]
[1-03]
[1-02]
[1-03]
[A.3.1.1.4] [1-06] Weather-dependent curve (cooling):
[1-07]
T t
[1-08]
[1-09]
[1-08]
[1-09]
RHBH/X04+08+16CA
Rotex HPSU low temperature Bi-Bloc
4P330419-1A – 2012.11
Description
0 (No): NOT installed
1: Installed (0.1 pulse/kWh)
2: Installed (1 pulse/kWh)
3: Installed (10 pulse/kWh)
4: Installed (100 pulse/kWh)
5: Installed (1000 pulse/kWh)
0 (No): NOT installed
1: Installed (0.1 pulse/kWh)
2: Installed (1 pulse/kWh)
3: Installed (10 pulse/kWh)
4: Installed (100 pulse/kWh)
5: Installed (1000 pulse/kWh)
Description
Description
0 (Absolute): Absolute
1 (Weather dep.):
Weather-dependent
2 (Abs + scheduled): Absolute +
scheduled (only for leaving water
temperature control)
3 (WD + scheduled):
Weather-dependent + scheduled
(only for leaving water temperature
control)
[1-00] [1-01]
T : Target leaving water
t
temperature (main)
T : Outdoor temperature
a
[1-06] [1-07]
T : Target leaving water
t
temperature (main)
T : Outdoor temperature
a
Leaving water temperature: Additional zone
# Code
[A.3.1.2.1] N/A
[A.3.1.2.3] [0-00]
[0-01]
[0-02]
[0-03]
[A.3.1.2.4] [0-04]
[0-05]
[0-06]
[0-07]
Leaving water temperature: Delta T emitter
# Code
[A.3.1.3.1] [9-09]
T a
[A.3.1.3.2] [9-0A]
T a
4 Configuration
Description
Set point mode:
0 (Absolute): Absolute
1 (Weather
Weather-dependent
2 (Abs + scheduled): Absolute +
scheduled (only for leaving water
temperature control)
3 (WD + scheduled):
Weather-dependent + scheduled
(only for leaving water temperature
control)
Weather-dependent curve (heating):
T t
[0-01]
[0-00]
[0-03] [0-02]
T : Target leaving
t
temperature (additional)
T : Outdoor temperature
a
Weather-dependent curve (cooling):
T t
[0-05]
[0-04]
[0-07] [0-06]
T : Target leaving
t
temperature (additional)
T : Outdoor temperature
a
Description
Heating: required temperature
difference between entering and
leaving water.
In case a minimum temperature
difference is required for the good
operation of the heat emitters in heating
mode.
Cooling: required temperature
difference between entering and
leaving water.
In case a minimum temperature
difference is required for the good
operation of the heat emitters in cooling
mode.
Installation manual
dep.):
T a
water
T a
water
13