Franke PESCARA FF4700 Manual De Instalación página 5

6. Install the mounting hardware to the
mounting shank of the Faucet Base (1)
underneath the mounting surface in the
following order: Rubber Washer (3), Plastic
Flange (4) and Fixing Plate (5) (fig. 2B).
7. Secure the faucet by tightening the
Fixing Nut (6) onto the mounting shank of
the Faucet Base (1) hand tight (fig. 2B).
8. Thread the Quick Connect Fitting (7) to
the Spray Supply Hose (8) BY HAND - NO
TOOLS (fig. 2C).
2C
8
7
9. Slide the Weight (9) onto the Spray Hose
(10) and leave it loose (fig. 2D)
10. Connect the other end of the Quick
Connect Fitting (7) to the end of the Spray
Hose (10) simply by pressing it in until it
clicks. To disconnect, press the button on
the side of the Quick Connect Fitting (7)
(fig. 2E).
2D
10
9
2E
7
10
– 5 –
11. Secure the Weight (9) approximately 2"
above the bend in the bottom of the Spray
Hose (10) by turning the adjustment knob
clockwise by hand until it is snug (fig 2F).
2F
9
2"
12. Connect the Flexible Supply Hoses (11)
to the water supply in the home (fig. 2G).
2G
11
13. Remove the Aerator (12) using the
Aerator Key (13) (fig. 2H).
2H
12
13
14. Turn on water, flush the faucet and
Aerator (12) to remove any debris and
check for leaks (fig. 2I).
15. Reinstall the Aerator (12) and ensure
everything is functioning properlty.
10
11
2I
12
EN