Belkin Wireless G Plus MIMO Manual De Usuario página 79

Using the Web-Based Advanced User Interface
Advanced Feature: The "Remote Access Port" option allows you to
configure the desired "Remote Access Port for Remote Management"
feature. The default access port is set to port 80.
Enabling/Disabling NAT (Network Address Translation)
Note: This advanced feature should be employed by advanced users
only.
Before enabling this function, MAKE SURE YOU HAVE SET THE
ADMINISTRATOR PASSWORD. Network Address Translation (NAT) is
the method by which the Router shares the single IP address assigned
by your ISP with the other computers on your network. This function
should only be used if your ISP assigns you multiple IP addresses or
you need NAT disabled for an advanced system configuration. If you
have a single IP address and you turn NAT off, the computers on your
network will not be able to access the Internet. Other problems may
also occur. Turning off NAT will not affect your firewall functions.
77 77
1
2
3
4
5
6
7
8
9
10