Ergotron Dell ERGITD-009 Guía De Referencia Rápida página 6

6
Verify cart operation
Connect the cart power cable to a dedicated circuit, (one
that is not being shared with other mobile devices).
Verify that the white light on the Power Indicator near the
cart top surface is lit.
First-Time battery charge
NOTE: Before using the mobile devices for the fi rst time
or after they have spent some time in storage, ensure that the
mobile devices have a full (100%) charge.
Prior to fi rst-time use, allow the mobile devices to charge in the cart for at least 2-3 hours before removing them for use.
Monitoring mobile device power
T
he Power/Fault Status Indicator lights near the cart top surface communicate the following conditions:
Power/Fault Status Indicator
Zones
Notebook Shelf Removal
a. Release the shelf by lifting up on the tab.
b. Pull shelf out.
a
6 / 12
Signal
White light, solid
White light, solid
All Fast Flashing
NOTE: Charge status of individual mobile devices can be seen directly on mobile devices.
Meaning
Power "ON"
Zone is charging
Overcurrent. Reset by removing excess devices
on aux outlet. Unplug and re-plug the cart.
b
888-24-369-M-00 rev.C • 09/18