Personal Safety - SPIDO SPRING 900 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 86
[
]
Legal and technical information
f) The pump is equipped with a socket compatible with it. The power source of your
country must be in keeping with international regulations.
g) The pump is equipped with a socket compatible with it. The power source of your
country must be in keeping with international regulations.

3) PERSONAL SAFETY

a) Risk of injury due to hot water. If the pump runs for an extended period when
the pressure side outlets are closed, the water in the pump can become heated so
that hot water can emerge from the outlet and cause injuries.
Pump may only run for a few minutes with the discharge side closed, before
automatic stop (pump protection system). Allow water to cool down and ensure the
water supply is functioning correctly before starting the pump again. Restart will be
possible only if the temperature of the water decrease enough
b) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
c) Use safety equipment. Safety equipment such as hearing protection will reduce
personal injuries.
d) Avoid accidental starting. Ensure the switch is in the off position before plugging
in.
e) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
f) Maintain your pump. If the pump is damaged, make it repair by a specialist before
any use. Many accidents are caused by not properly maintained power tools
g) Follow these instructions to use the pump, its accessories, connectors, etc...
properly. The pump must be used only for its prescribed purpose. Any use other
than those mentioned in this Manual will be considered a case of misuse. The user
and not the manufacturer shall be liable for any damage or injury resulting from
such cases of misuse.
4) REPAIR
If necessary, your pump must be repaired by a qualified technician, using
only replacing spare parts identical to the originals.
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Spring 1100Spring 1300e002070002071002072

Tabla de contenido