Tycam 1100 Indoor; Contents; Description; Support Assembly - DELTA DORE Tycam 1100 Manual De Instalación

5 - Tycam 1100 Indoor

5.1 Contents

1- Camera
2- Support
3- EU plug
4- UK plug
5- Mains adaptor (1m50)
6- Installation guide
Regulatory documents
7- RJ 45 cable (1m50)

5.2 Description

1
2
6
7
8
9
10

5.3 Support assembly

- Screw the support to the back
of the camera.
- Place the camera on a flat surface.
- Loosen nut B,
- Point the camera correctly
then tighten nuts A and B.
- If the camera is not held correctly,
loosen screw C to tighten the nut B.
22
3
1- Memory card location
2- RESET/WPS button (Open the protective cover).
3- RJ45 Network Connector
4- Power supply socket
5- Loudspeaker
6- Microphone
7- Lens
3
8- Status LED
5
4
9- PIR (passive infrared sensor)
10- Infrared LED (night vision)
1
2
5
4
Red and steady:
Blue and steady:
Slow flashing red:
Slow flashing blue:
Fast flashing red:
Fast flashing blue:
Red/Blue alternative
flashing:
B
1
C
A
2
B
6
7
Camera start.
The camera is connected to the
network.
No connection to the server
(check the firewall and
parental controls).
Camera is communicating on
network.
Safety installation.
Camera updating.
Waiting to read QR Code flashing:
or no assigned IP address.
(check that the DHCP function
is activated on your router and that
the Wi-Fi network is in range).
0°/360° 0°/90°
0°/360°