Atlantis ADSL2+ Guia De Inicio Rapido página 4

Norway (NO):
This subsection does not apply for geographical area within a radius of 20 km from the center of Ny
Alesund.
Safety Precautions
Please read the following instructions carefully in order to avoid any risk or damage to the device caused by fire or
electric power failure:
 Only qualified personnel should carry out any technical work on the device.
 Use the type of power marked on the volume label.
 Use the power adapter that is packed within the device package.
 Pay attention to the power load of the outlet or extension lines. An overloaded power outlet or damaged lines and
plugs may cause electric shock or fire accident. Check the power cables regularly. In case of damage, replace the
component at once.
 Proper space left for heat dissipation is necessary to avoid damage caused by overheating to the device. The long
and thin holes on the device are designed for heat dissipation to ensure that the device works normally. Do not
cover these heat dissipation holes.
 Do not put this device close to a heat source or in a place with high temperatures. Do not expose it to direct
sunlight.
 Keep this device in a dry place. Do not spill any fluid on this device.
 Do not connect this device to any PCs or electronic products, unless our customer engineer or your broadband
provider gives you exact instructions on how to operate, as any wrong connection may cause power damage or
fire risk.
 Do not place this device on an unstable surface or support.
 When cleaning, avoid using cleaning sprays or any product containing alcohol or other flammable liquids.
 Avoid overheating. This may reduce the life of the device.
 Protect your device from humidity, direct sunlight as well as high and extremely low temperatures.
 Do no place any liquids on or close to the unit.
 If the device is brought from a cold environment into a warmer installation site, condensation may occur. Wait
until the temperature of the device has normalized. The unit should be completely dry before you connect it to AC
main.
 Please use the supplied AC/DC Adapter included in the package. If you connect it to other devices, this product or
power supply unit may be damaged.
 We recommend you to place the device on a non-slip surface.
 Please note that the rubber/plastic feet on the devices may damage the surface.
 Check the cable regularly. Damaged cables must be replaced immediately.
 Ensure that no objects enter the connection sockets.
 Do NOT upgrade firmware over a wireless connection. Failure of the device may result. Use only hard-wired
network connections.
 Restoring a saved configuration file generated with another firmware version may render your Router unstable and
some functions may not work properly. After upgrading, please reset the router to factory default settings, then
manually re-enter your settings.
 Unplug ADSL Line and connect it to the Router using only 1 Ethernet port.
 Please pay attention. Any electrical shutdown during this procedure may cause malfunctioning.
 When uploading a software to the Router, it is important not to interrupt the Web browser by closing the window
or loading a new page. If the browser is interrupted, it may corrupt the software.
Important information for the correct recycle/treatment procedures of this equipment
The crossed-out wheeled bin symbol printed on the unit label or unit packaging indicates that this equipment must
not be disposed of as unsorted municipal waste but it should be collected separately.
The waste of electric and electronic equipment must be treated separately, in order to ensure that hazardous
materials contained inside the equipment are not buried thereby providing potential future problems for the
environment and human health. Moreover, it will be possible to reuse and recycle some parts of the waste of electric
4