Bimar VP411 Manual De Instrucciones página 12

Fig.1
2) Protection grills: loosen the rings (15) and (13): the latter must be turned in a clockwise
direction.
Insert the rear grill (16) onto the motor body, so that the handle points upwards, and lock
with the ring (15).
Insert the fan blade (14) fully onto the motor's shaft (1), and lock with the ring (13) by
turning it in an anticlockwise direction.
To attach the front grill, place the main unit onto a smooth surface.
3) ouple the front grille (12) to the rear one (16) locking it with the closing hooks. For
C
safety reasons, you must make sure that it is attached by using the screws and nuts
provided, which are to be used in the holes in the edge of the grilles (the holes for the
screw must be in the lower part).
4) Attach the fan body to the stand by inserting the lower hole on the adjustable pole of
the stand and lock it by tightening the stand attachment screw (6).
Fig.2
1. Motor shaft
2. Oscillation button
3. Body
4. Pole attachment ring nut
5. Cover
6. Screw
7. Foot
8. Selectors
9. Fixed pole
10. Adjustable pole
11. Handle
12. Front grille
13. Fan attachment ring nut
14. Fan
15. Grille attachment ring nut
16. Rear grille
12