Warning Before Installation
Power off the Network Camera as soon as
smoke or unusual odors are detected.
Do not disassemble the Network Camera.
Do not insert sharp or tiny objects into the
Network Camera.
Do not manually pan and tilt the Network
Camera when the power is on.
1
Package Contents
AS6316
Screws / Alignment Sticker / T20 and T25
L-wrench / Desiccant Bags
Quick Installation Guide
IMPORTANT:
Below are the requirements for powering the the speed dome:
Feature
Power Consumption
Normal w/ heater
48W, requires a 60W PoE injector (AP-GIC-010A-060) or PoE switch (AW-
IHU-0100, -0200, -0600); AC24V (3.5A) also applies
w/ IR unit
95W, VIVOTEK's AW-IHU-0101 & AW-IHU-0201
DC 24V (3.5A) applies, AC 24V is not sufficient.
Refer to your user's manual for the
operating temperature.
Do not touch the Network Camera during
a lightning storm.
Do not drop the Network Camera.
Wall Mount Bracket / Screws
I/O Combo Cable
Software CD
EN-1